Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

APC Service Bypass Panel/230V 10A

Forsiden Komponenter Komponenttilbehør APC Service Bypass Panel/230V 10A
APC Service Bypass Panel/ 230V 10A (SBP1500RMI)
APC Service Bypass Panel/ 230V 10A (SBP1500RMI)
APC Service Bypass Panel/ 230V 10A (SBP1500RMI)
APC Service Bypass Panel/ 230V 10A (SBP1500RMI)

APC Service Bypass Panel/230V 10A

Varenr.:
SBP1500RMI
EAN:
0731304263593
  • Type PDU
5 877,-
4 701,60 ekskl. mva
Forventet på lager 09.04.2024
Beskrivelse

APC SERVICE BYPASS PDU, 230V 10AMP W/ (6) IEC C13


APC Maintenance Bypass Panels , Input: 230V , Input Connections: IEC-320 C14 , Cord Length: 6.5 feet ( 1.98 meters ) , Output: 230V , Output Connections: IEC 320 C13,IEC Jumpers

Output

Nominal Output Voltage: 230V
Maximum Total Current Draw per Phase: 10A
Output Connections: (6) IEC 320 C13 (1) IEC Jumpers
Always on Outlets: 6
Overload Protection: Yes
Cord Length: 1.22 meters

Input

Nominal Input Voltage: 230V
Input Frequency: 50/60 Hz
Input Connections: IEC-320 C14
Cord Length: 1.98 meters
Number of Power Cords: 1
Acceptable Input Voltage: 220-240 VAC
Maximum Line Current per phase: 10A
Maximum Input Current per phase: 10A
Load Capacity: 1500 VA
Load Power Factor Range: 0 to 1

Physical

Net Weight: 2.00 KG
Maximum Height: 89.00 mm
Maximum Width: 432.00 mm
Maximum Depth: 76.00 mm
Shipping Weight: 3.50 KG
Shipping Height: 151.00 mm
Shipping Width: 463.00 mm
Shipping Depth: 295.00 mm
Color: Black
Units per Pallet: 56.00

Environmental

Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0-4500 meters
Storage Temperature: -15 - 45 °C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0-15000 meters

Conformance

Regulatory Approvals: VDE
Standard Warranty: 2 years repair or replace
Environmental Compliance: RoHS 7b Exemption,REACH: Contains No SVHCs

Features

Transfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance.

(3) Breaker maintenance bypass panel to isolate the UPS from the critical load

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.