Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

DELOCK Storage drive docking station

Forsiden Lagring Eksterne Disker & Kabinetter DELOCK Storage drive docking station
DELOCK Storage drive docking station (64138)

DELOCK Storage drive docking station

Varenr.:
64138
EAN:
4043619641383
  • Grensesnitt SATA
  • Installert 0GB
  • Max disker 2
  • RAID Nei
  • Type Docking
3 354,-
2 683,20 ekskl. mva
Beskrivelse

Docking Station for 1 x M.2 NVMe SSD + 1 x M.2 SATA SSD with SD Express (SD 7.1) Card Reader and Clone Function

64138

Features:
  • SD Express slot. The SD Express slot allows to read and write SD Express memory cards. SD, SDHC and SDXC memory cards with UHS-I and UHS-II can also be used.
  • Simultaneous using of all ports. All three memories can be used simultaneously.
  • Clone Function without PC. The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.
  • Ideal test equipment. The memory is simply plugged into the robust housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly.
  • Power supply included. The power supply, which is included, will be connected to the USB-C™ power connector and thus supplies the docking station and all connected memories with power.
Specifications:

General
  • Connectors:
    • 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
    • 2 x 67 pin M.2 key M slot
    • 1 x SD Express slot
    • 1 x USB Type-C™ female (power supply)
  • Chipset: JMicron JMS581
  • Supports M.2 modules with key M or key B+M based on PCIe (NVMe)
  • Supports M.2 modules with key B+M based on SATA
  • Supports NVM Express (NVMe)
  • Supports S.M.A.R.T.
  • Supports TRIM
  • Supports DevSleep
  • Supports Native Command Queuing (NCQ)
  • Data transfer rate up to 10 Gbps
  • Supports SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.1
  • Supports UASP
  • LED indicator for power, access and copy status
  • Bootable
  • Function key:
    • 1 x Clone button
    • 1 x On / Off switch
    • 1 x DIP switch for clone mode
  • Dimensions (LxWxH): ca. 76 x 79 x 18 mm
  • Hot Plug, Plug & Play
Power supply specification
  • Wall power supply
  • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A
  • Output: 5.0 V / 3.0 A
System requirements
  • Android 10.0 or above
  • Chrome OS 90.0 or above
  • iPad Air (4th Generation) or above
  • Linux Kernel 5.8 or above
  • Mac OS 11.2.3 or above
  • Surface Pro 7
  • Windows 8.1/8.1-64/10/10-64
  • PC or laptop with a free USB Type-A port or
  • Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 port
Package content
  • M.2 docking station
  • Cable USB-C™ male to USB-C™ male, length ca. 80 cm
  • Cable USB-C™ male to USB Type-A male, length ca. 80 cm
  • External power supply
  • User manual

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.