MOXA NPORT DEVICE SERVER 12-48VDC
|
|
MOXA NPORT DEVICE SERVER 12-48VDC
|
NPort 5100A Series
1-port RS-232/422/485 device server (Easy, Green, Surge Protected)
- World's lowest power consumption, only 1 W
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
The NPort 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort 5100A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5100A series becomes the world's only device server with power consumption less than 1 W. The NPort 5100A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today's industrial environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort 5100A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
3-step Web-based Configuration
The NPort 5100A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5100A's web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.
No. of Ports
1
Speed
10/100 Mbps, auto MDI/MDIX
Connectors
8-pin RJ45
Magnetic Isolation Protection
1.5 KV built-in
Serial Standards
NPort 5110A: RS-232
NPort 5130A: RS-422/485
NPort 5150A: RS-232/422/485
Number of Ports
1
Connectors
DB9 male
Serial Line Protection
15 KV ESD protection for all signals, Level 1 Surge, EN61000-4-5
RS-485 Data Direction Control
ADDC (automatic data direction control)
Pull High/Low Resistor for RS-485
1 KΩ, 150 KΩ
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate
50 bps to 921.6 Kbps
NPort 5110A
- 1-port RS-232 device server, 0 to 60°C operating temperature
NPort 5110A-T
- 1-port RS-232 device server, -40 to 75°C operating temperature
NPort 5130A
- 1-port RS-422/485 device server, 0 to 60°C operating temperature
NPort 5130A-T
- 1-port RS-422/485 device server, -40 to 75°C operating temperature
NPort 5150A
- 1-port RS-232/422/485 device server, 0 to 60°C operating temperature
NPort 5150A-T
- 1-port RS-232/422/485 device server, -40 to 75°C operating temperature
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.